Mounting Circuit Cards In Pim; Mounting Hub (Pa-M96) In A Pim; Figure 4-7 Mounting Hub Card In Pim 0 - NEC NEAX 2400 IPX Manual

INSTALLATION

Mounting Circuit Cards in PIM

3. Mounting Circuit Cards in PIM

3.1 Mounting HUB (PA-M96) in a PIM

Mount the HUB (PA-M96) card in an appropriate slot of a PIM as shown in
connected via a HUB card, be sure to use a dedicated HUB for the Fusion link.
HUB (PA-M96) can be mounted anywhere in a PIM of any IMG stack. However, if your system is 1-IMG
Note:
type, mount the HUB in PIM0.
Mount a HUB card in an appropriate slot providing the anti-static kit.
CHAPTER 4
Page 42
Revision 1.0

Figure 4-7 Mounting HUB Card in PIM 0

NDA-24299
Figure
HUB
HUB
PA-M96
4-7. When the MAT is
ATTENTIO N
Contents
Static Sensitive
Handling
Precautions Required
Anti-static Kit