Siemens SINUMERIK 840D sl Universal Operating Manual page 116
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Setting up the machine
5.6 Monitoring axis and spindle data
You can limit the spindle speeds in fields "Minimum" and "Maximum" within the limit values
defined in the relevant machine data.
Spindle speed limitation at constant cutting rate
In field "Spindle speed limitation at G96", the programmed spindle speed limitation at constant
cutting speed is displayed together with the permanently active limitations.
This speed limitation, for example, prevents the spindle from accelerating to the max. spindle
speed of the current gear stage (G96) when performing tapping operations or machining very
small diameters.
Note
The "Spindle data" softkey only appears if a spindle is configured.
Procedure
116
1.
Select the "Parameter" operating area.
2.
Press the "Setting data" and "Spindle data" softkeys.
The "Spindles" window opens.
3.
If you want to change the spindle speed, place the cursor on the "Maxi‐
mum", "Minimum", or "Spindle speed limitation at G96" and enter a new
value.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
