17.3
Displaying messages
PLC and part program messages may be issued during machining.
These message will not interrupt the program execution. Messages provide information with
regard to a certain behavior of the cycles and with regard to the progress of machining and are
usually kept beyond a machining step or until the end of the cycle.
Overview of messages
You can display all issued messages.
The message overview contains the following information:
• Date
• Message number
is only displayed for PLC messages
• Message text
Procedure
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1.
Select the "Diagnostics" operating area.
2.
Press the "Messages" softkey.
The "Messages" window appears.
Alarm, error, and system messages
17.3 Displaying messages
415