14.2
Select teach in mode
Change to Teach in mode to adapt the current program.
Requirement
"AUTO" mode: The program to be edited is selected.
"MDI" mode The program to be edited is loaded into the MDI buffer.
Procedure
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1.
Select the "Machine" operating area.
2.
Press the <AUTO> or <MDA> key.
3.
Press the <TEACH IN> key.
4.
Press the "Teach prog." softkey.
Teaching in a program
14.2 Select teach in mode
379