Permit Modem - Siemens SINUMERIK 840D sl Universal Operating Manual

If remote access is active, these icons on the status line inform you whether remote access is
currently active or whether only monitoring is permitted.
Procedure
Further information
You will find further information on configuration in the SINUMERIK Operate Commissioning
Manual.
17.9.2

Permit modem

You can permit remote access to your control via a teleservice adapter IE connected at X127.
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1. Select the "Diagnostics" operating area.
2. Press the "Remote diag." softkey.
The "Remote diagnostics (RCS)" window opens.
3. Press the "Change" softkey.
The "Selected in the HMI" is activated.
4. If you want to use remote control, select the "Permit remote control" item.
Remote control is only possible if the "Allow remote operation" item is
specified in the fields "Specified by PLC" and "Selected in HMI".
5. Enter new values in the group "Behavior for remote access confirmation"
if you would like to change the behavior relating to confirming remote
access.
6. Press the "OK" softkey.
The settings are accepted and saved.
Machine manufacturer
Follow the machine manufacturer's instructions.
Software option
You need the "Access MyMachine /P2P" option to display the "Allow modem" softkey.
Alarm, error, and system messages
17.9 Remote diagnostics
429