Siemens SINUMERIK 840D sl Universal Operating Manual page 182

Machining the workpiece
7.12 Display G and auxiliary functions
Group
G group 7
G group 8
G group 9
G group 10
G group 13
G group 14
G group 15
G group 16
G group 21
G group 22
G group 29
G group 30
Procedure
...
The G groups selection displayed in the "G Functions" window may differ.
Further information
Additional information on configuring the displayed G groups is provided in the SINUMERIK
Operate Commissioning Manual.
182
Meaning
Tool radius compensation (e.g. G40, G42)
Settable work offset (e.g. G54, G57, G500)
Offset suppression (e.g. SUPA, G53)
Exact stop - continuous-path mode (e.g. G60, G641)
Workpiece dimensions, inch/metric (e.g. G70, G700)
Workpiece dimensioning absolute/incremental (G90)
Feed type (e.g. G93, G961, G972)
Feedrate override at inside and outside curvature (e.g. CFC)
Acceleration profile (e.g. SOFT, DRIVE)
Tool offset types (e.g. CUT2D, CUT2DF)
Radius/diameter programming (e.g. DIAMOF, DIAMCYCOF)
Compressor on/off (e.g. COMPOF)
1. Select the "Machine" operating area.
2. Press the <JOG>, <MDI> or <AUTO> key.
3. Press the "G functions" softkey.
The "G Functions" window is opened.
4. Press the "G functions" softkey again to hide the window.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal