Multitouch Operation With Sinumerik Operate; Multitouch Panels - Siemens SINUMERIK 840D sl Universal Operating Manual

Multitouch operation with SINUMERIK Operate

4.1

Multitouch panels

The "SINUMERIK Operate Generation 2" user interface has been optimized for multitouch
operation. You can execute all actions by touch and finger gestures. Using SINUMERIK Operate
is much quicker with touch operation and finger gestures.
The following operator panel fronts, handheld devices and SINUMERIK control systems can be
operated with the "SINUMERIK Operate Generation 2" user interface:
• OP 015 black
• PPU 290.4
• HT 8
• HT 10
• SIMATIC ITC V3
• SIMATIC IFP
• SIMATIC panel IPC
Additional information
You can find further information on configuring the user user interface in the SINUMERIK
Operate Commissioning Manual.
You can find additional information on Multitouch Panels at:
• Operator Panels Equipment Manual (OP 015 black / 019 black)
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Machine manufacturer
Please observe the information provided by the machine manufacturer.
4
71