Siemens SINUMERIK 840D sl Universal Operating Manual page 92

Multitouch operation with SINUMERIK Operate
4.6 SINUMERIK Operate Display Manager
Operator control
92
Function
PDF
Opens the PDF stored here.
The following functions are available in the PDF display:
• Open (<CTRL> + <O>)
• Mark (<CTRL> + <A>)
• Copy (<CTRL> + <C>)
• Go to (<CTRL> + <G>)
• Search (<CTRL> + <F>)
• Display and hide bookmarks (<CTRL> + <B>)
Alternatively, use the PDF display via the animated toolbar at the top left.
You optimize the read view using the following finger gestures:
• Double tap: Adapt width:
• <CTRL> + double tap: Adapt height:
If you change the language when viewing a PDF document, the PDF docu‐
ment is reloaded in the respective language.
If no PDF document is available for the language set, the English PDF docu‐
ment is displayed.
The position in the PDF document is retained beyond language switchover
across sessions if the PDF document contains bookmarks.
Virtual keyboard
Displays a QWERTY keyboard in the display area for applications as well as in
the 4th display area below SINUMERIK Operate.
If the virtual keyboard is selected while the display area is maximized, the
keyboard opens as a pop-up. The keyboard can be moved on the display as
required by means of touch operation.
Camera
Live streaming of the configured camera:
• Live streaming camera 1
• Live streaming camera 2
• Live streaming camera 1 and camera 2
If a camera has been configured, you can directly view the relevant stream‐
ing process. If a camera configuration is changed or an issue with connec‐
tivity occurs, reboot the system to activate the streaming process on the
camera.
Maximizing the display area
Enlarges the area with SINUMERIK Operate and the area for the applications
to the full dimensions of the Panel.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal