Siemens SINUMERIK 840D sl Universal Operating Manual page 287
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Unloading a tool in a file
According to the corresponding setting, the unloaded tool is deleted from the NC memory after
it has been read out.
Deleting a tool in a file
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1.
The tool list is open.
2.
Place the cursor on the tool that you would like to unload from the mag‐
azine and press the "Unload" and "In file" softkeys.
3.
Navigate to the required directory and press the "OK" softkey.
4.
Enter the required file name in the "Name" field and press the "OK" softkey.
The field is preassigned with tool names.
The tool is unloaded and the tool data is written to the file.
1.
The tool list is open.
2.
Position the cursor on the tool that you wish to delete.
3.
Press the "Delete tool" and "In file" softkeys.
3.
Navigate to the required directory and press the "OK" softkey.
4.
Enter the required file name in the "Name" field and press the "OK" softkey.
The field is preassigned with tool names.
The tool is unloaded and the tool data is written to the file. The tool is then
deleted from the NC memory.
Tool management
12.5 Tool list
287
Advertisement
Table of Contents
