Creating Screenshots - Siemens SINUMERIK 840D sl Universal Operating Manual

17.5

Creating screenshots

You can create screenshots of the current user interface.
Each screenshot is saved as a file and stored in the following folder:
/user/sinumerik/hmi/log/screenshot
Procedure
Ctrl + P
Copy file
Note
WinSCP
You can also copy the screenshots to a Windows PC using "WinSCP".
Note
Open files
Open the files in SINUMERIK Operate to view the screenshots. On a Windows PC, you can open
the files using a graphic program such as "Office Picture Manager".
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Press the "Ctrl + P" key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system are in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999.png". You can create up to 9,999 screen‐
shots.
1. Select the "Commissioning" operating area.
2. Press the "System data" softkey.
3. Open the folder specified above, and select the required screenshots.
4. Press the "Copy" softkey.
- OR -
Press the "Cut" softkey.
5. Open the required archive directory, e.g. on a USB flash drive and press the
"Paste" softkey.
Alarm, error, and system messages
17.5 Creating screenshots
417