Equipping Multitool With Tools - Siemens SINUMERIK 840D sl Universal Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl Universal:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Tool management
12.15 Working with multitool
Note
The tool creation sequence can be defined differently.
12.15.3
Equipping multitool with tools
Precondition
A multitool has been created in the tool list.
Procedure
Equipping the multitool with a new tool
Loading the multitool
Loading the tool into the multitool
312
The multitool is created in the tool list.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
The tool list is opened.
2.
Select the required multitool, position the cursor on an empty mul‐
titool location.
3.
Press the "New tool" softkey.
4.
Using the appropriate selection list, e.g. favorites, select the re‐
quired tool.
2.
Select the required multitool, position the cursor on an empty mul‐
titool location.
3.
Press the "Load" softkey.
The "Load with..." window opens.
4.
Select the required tool.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal
Advertisement
Table of Contents
