Selecting A Magazine - Siemens SINUMERIK 840D sl Universal Operating Manual

12.5.6

Selecting a magazine

You can directly select the buffer memory, the magazine, or the NC memory.
Procedure
Hiding magazines
The magazine selection behavior with multiple magazines can be configured in different ways.
Further information
Additional information on the configuring options is provided in the Tool Management Function
Manual.
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
1. The tool list is opened.
2. Press the "Magazine selection" softkey.
If there is only one magazine, you will move from one area to the next (i.e.
from the buffer memory to the magazine, from the magazine to the NC
memory, and from the NC memory back to the buffer memory) each time
you press the softkey. The cursor is positioned at the beginning of the
magazine each time.
- OR -
If there is more than one magazine, the "Magazine Selection" window
opens. Position the cursor on the desired magazine in this window and
press the "Go to" softkey.
The cursor jumps directly to the beginning of the specified magazine.
Deactivate the checkbox next to the magazines that you do not want to appear in the
magazine list.
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Tool management
12.5 Tool list
283