Siemens SiPass integrated Reference Manual page 14

Alarm Class
4
14 | 66
Type
Soft Anti Pass Back Error
Access Denied- Intrusion
Area Armed
Access Denied – Hard
Perimeter Violation
Soft Perimeter Violation
3 Wrong PIN entries
Timed Re-entry Error
Card not yet active
Card Expired
Time Schedule Violation
Elevator Offline Denied
Elevator Override Denied
Elevator Access Collision
Intrusion Control Disabled Intrusion Control has been disabled at the
SALTO Battery Low
SALTO PPD Connection
Anti-Passback Capacity Full
Area
Capacity Exceeded
Capacity Not Full
Four Eyes Access Alarm
Four Eyes Access Normal The Four Eyes Anti Passback area is in a
Capacity Empty
Workgroup Capacity Full
Status
A cardholder has failed to use their card
when leaving an area with hard anti-
passback and has tried to re-enter the same
area. The cardholder will be denied access.
Access has been denied because an
intrusion area is still armed.
An access attempt has been denied, due to
an Anti-Passback violation in an area
configured with a Hard Anti-Passback mode.
A cardholder has entered a soft Anti-
Passback area that they are already within.
A cardholder has entered 3 Wrong PINs at a
reader.
A cardholder has attempted to re-enter an
area (set to Timed Re-Entry Anti-Passback
mode) before their allocated re-entry time
A card was presented at a reader before its
system start date has been reached.
A card was presented at a reader after its
system end date has expired.
A card was read at a reader outside the
normal scheduled time for that card.
The HLI Elevator is offline.
The HLI Elevator is in external override.
The HLI Elevator is in access collision
because another access session is in
progress.
reader.
A SALTO offline door requires a battery
change
A PPD has been connected to a SALTO
offline door to update the door
The number of cardholders in the area
equals the defined maximum
The number of cardholders in the area
exceeds the defined maximum.
The number of cardholders in the area does
not exceed the defined maximum.
The Four Eyes Anti Passback area is in an
alarm state. The group alarm conditions are
established in the
normal state.
There are no cardholders in the area.
The number of cardholders in the area from
a Workgroup has reached the maximum for
that Workgroup.
Description
Area
dialog.
A6V11144326