Siemens SiPass integrated Reference Manual page 20

Operational Modes
5
20 | 66
Type Mode
Card + PIN Arm/Disarm
Arm/Disarm Only
Programmable
Authorization – Card Only
Programmable
Authorization – Card + PIN
Description
A card must be presented to gain access at the
access point. A single card badge unlocks the
door providing access without intrusion. A card
badge with a PIN unlocks the door and
simultaneously arms/disarms the intrusion area.
Press '1' then select 'E' to arm the area or press
'0' and then 'E' to disarm the intrusion area.
A valid card must be presented at the access
point as well as a PIN must be entered in order
to arm or disarm the intrusion area. Press '1'and
then select 'E' to arm the area; or press '0' and
then 'E' to disarm.
A card must be presented at the access point
for an 'authorization started' event to be
generated. Access is only granted if an
'authorization granted' event is received.
A card + PIN must be presented at the access
point for an 'authorization started' event to be
generated, typically used as a trigger in
Advanced Security Programming. Access is
only granted if an 'authorization granted' event
is received.
A6V11144326