Siemens SiPass integrated Reference Manual page 51

Hide thumbs Also See for SiPass integrated:
Table of Contents

Advertisement

A6V11144326
Type
Set mode "Authorization
– Card Only"
Set mode "Authorization
– Card + PIN"
Anti-Passback
Reset Count
Area
Override Mode
Restore Mode
Controller
Turn Siren On
Turn Siren Off
Device
Device Reset
Report all inputs
Card Format Override
Door Interlocking
Disable Door Interlocking Disable Door Interlocking.
Restore Door
Interlocking
Floor
Bank Floor Secure
Bank Floor Unsecure
Bank Floor Enable
Bank Floor Disable
Return to Time Schedule Returns the programmed access control for
Cancel Permanent
Action
Input Point
Disable
Enable
Return to Time Schedule
Control
Cancel Permanent
Action
Command
Resets the current count for the anti-
passback area to zero.
Override the selected area with a specific
mode.
Restores the configured Anti-Passback
mode.
If a siren has been connected to the ACC,
it will be activated.
If a siren has been connected to the ACC
and is currently active, it will be de-
activated.
A device has been reset.
Reports all inputs on a device.
This Controller Event Task is specifically
for Legacy Asco RIM devices. For further
details regarding this event task, please
contact the Technical Support Team.
Restore Door Interlocking.
Secures the specified elevator floor (for all
elevators within the same bank).
Unsecures the specified elevator floor (for
all elevators within the same bank).
Enables the specified elevator floor (for all
elevators within the same bank).
Disables the specified elevator floor (for all
elevators within the same bank).
the specified floor.
Any current Permanent Command or Event
Task, or Access/Internal Action operating
on the floor will be cancelled. The next
Control State in the Control State Queue
will take effect.
Disables the selected input point.
Enables the selected input point.
The output will return to normal Time
Schedule control.
Any current Permanent Command or Event
Task, or Access/Internal Action operating
on the target will be cancelled. The next
Control State in the Control State Queue
will take effect.
Controller Event Tasks
Commands
Description
51 | 66
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents