Siemens SiPass integrated Reference Manual page 48

Controller Event Tasks
8
Sources
48 | 66
Type State (trigger)
Exit Delay Timer
Started
Normal
Part Armed
Part Armed B
Keypad Standard Event
Output Point Locked
Unlocked
Reader Smart Card Event
Standard Card Event An event task is triggered when a standard
Time Schedule End
Start
Start and end
Description
An event task will be triggered when the exit
delay timer has started.
An event task will be triggered when the
intrusion area enters the normal state.
Intrusion Area has been Part Armed.
Intrusion Area has been Part Armed B. (SPC
only)
An event task is triggered when the "enter" or
"#" key has been pressed at an access point
with a keypad.
Output point has been locked.
Output point has been unlocked.
An event task is triggered when an event task
is triggered when a MIFARE smart card has
been badged at an access point.
access card (non-smart card) has been
badged at an access point.
An event task is triggered when the selected
Time Schedule ends.
An event task is triggered when the selected
Time Schedule begins.
An event task is triggered when the selected
Time Schedule begins, and again when it
ends.
A6V11144326