Siemens SiPass integrated Reference Manual page 23

A6V11144326
Type Mode
Fire Stair
PIR
Normal Only
Alarm Only
Report Disable
Intrusion Area Entry/Exit
Intrusion Area No Seal
Check
Intrusion Area
Instantaneous
Intrusion Area Hand Over
Output Delay
Single Pulse
Toggle
Operational Modes
Description
Defines the Input point as a fire stair door
contact sensor.
PIR mode defines the input point as a PIR
detector.
Only normal states are reported to the system
Only alarm states are reported to the system
Disables alarm reporting from the input point to
the server. This will prevent alarms from
occurring and appearing in the Audit Trail, but
Event Tasks will still be triggered.
Defines the input type as normal except if the
cardholder has isolation privileges, they can
override a point (if the point is not sealed).
The input seals are not checked when intrusion
area is armed. Defines the input type as normal.
Defines the input type as normal except that
when the area is secured, there are no entry or
exit delay times.
Allows secured areas to be accessed in order
for an alarm unit to be switched off.
Allows access to the area for the time
configured in the Delay field.
Allows access by unlocking the point, followed
by a quick re-lock.
Toggles the access point between the Lock and
Unlock state, each time a card is badged at the
access point.
5
23 | 66