Siemens SiPass integrated Reference Manual page 39

A6V11144326
Target Command
Slow Pulse Output
Fast Pulse Output
Single Pulse
Return to Time
Schedule control
Cancel Permanent
Action
Unlock, Override Door
Interlocking
Allow Access,
Override Door
Interlocking
Output Point Same as Output
Group Points
Reporting Print
SaveAs
Email Forwarding
System Turn Printer Off
Turn Printer On
Turn Printer to Short
Log
Turn Print to Full Log
Check Expired Cards
Check Before Start
Date Cards
Execute Command
Host event tasks
Targets / Commands
Description
The output will pulse slowly. For example, this
could be used for alarms that utilize a pulsed
output like strobes or sirens.
Enter the time that you want the output to slow
pulse into the Data field, using the format
HH:MM:SS.
The output will pulse quickly. For example, this
could be used for alarms that utilize a pulsed
output like strobes or sirens.
Enter the time that you want the output to fast
pulse into the Data field, using the format
HH:MM:SS.
The output will emit a single pulse.
The output will return to normal Time Schedule
control.
Any current Permanent Command or Event
Task, or Access/Internal Action operating on the
target will be cancelled. The next Control State in
the Control State Queue will take effect.
Unlocks the output and ignores any Door
Interlocking configuration.
Allows access and ignores any Door Interlocking
configuration.
See above
Print the selected report.
Exports the selected report to a file.
Export the selected report to a file and then email
it to selected cardholders.
Turns the Audit Trail printer off.
Turns the Audit Trail printer on.
Sets the Audit Trail messages (printed) to
summary form (not all columns are sent to the
printer).
Sets the Audit Trail messages (printed) to all
columns that can appear in the Audit Trail.
When cards are presented for verification at an
access point, their expiry dates are checked.
When cards are presented for verification at an
access point, their start dates are checked.
Executes a command. (Typically, this would be
used to start an executable (.EXE) or batch
command (.BAT) file.
Enter the path and filename of the file into the
Data field.
For example, C:\Program Files\myfile.bat
7
39 | 66