Siemens SiPass integrated Reference Manual page 42

Controller Event Tasks
8
Sources
42 | 66
Type State (trigger)
Reader Tamper OK
Self Authorization
Granted
Valid Daily Code
Waiting Dual
Custody Verification
Always Set N/A
Anti Passback Area Area Count Reset
Area Mode Changed Area mode has been changed.
Capacity Empty
Capacity Exceeded
Capacity Full
Capacity Not Empty
Capacity Not Full
Four Eyes Access
Alarm
Four Eyes Access
Normal
Workgroup Capacity
Empty
Workgroup Capacity
Exceeded
Workgroup Capacity
Full
Workgroup Capacity
Not Empty
Workgroup Capacity
Not Full
Card Access Denied- Hard
perimeter violation
Description
An event task is triggered when a reader
returns from a tamper state. Only valid for the
Siemens reader range.
Cardholder has self authorized on at Dual
Custody access point.
An event task is triggered when a valid daily
code has been entered at a keypad/reader.
An event task is triggered after the first
cardholder has badged a card, signalling that
the input point is waiting for the second valid
card badge of the config-ured Dual Custody.
This option will set Trigger 1 to be TRUE. This
can be used to generate complex event
triggers, when used in conjunction with the
logical operators and Trigger 2.
Area count has been reset.
The area is vacant.
An event task is triggered when the number of
cardholders in the area exceeds the defined
maximum.
An event task is triggered when the number of
cardholders currently in the anti-passback area
has reached the programmed capacity.
The area is no longer empty.
The number of cardholders in the area does
not exceed the defined maximum.
An event task is triggered when an area under
four eyes control has been violated.
An event task is triggered when an area under
four eyes control returns to normal.
The number of cardholders in the area from a
Workgroup is zero.
The number of cardholders in the area from a
Workgroup has exceeded the maximum for
that Workgroup.
The number of cardholders in the area from a
Workgroup has reached the maximum for that
Workgroup.
The number of cardholders in the area from a
Workgroup is no longer zero.
The number of cardholders in the area from a
Workgroup has not reached the maximum for
that Workgroup.
An event task is triggered when an access
attempt has been denied, due to an Anti-
Passback violation in an area configured with
a "Hard" anti-Passback mode.
A6V11144326