Replacing An Elight Strip Light - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide

5.4.23 Replacing an eLight Strip Light

Impact on the System
The eLight strip light is off during replacement.
Preparations
●
●
Procedure
Step 1 Remove three white rubber panels from the door frame.
Step 2 Remove the side covers from the posts.
Step 3 Cut off the cable tie that binds the strip light extension cable to the top of the
post.
Step 4 Pull out the strip light from the hole at the bottom of the left post.
Step 5 Disconnect the strip light terminal from the strip light extension cable of the door
post.
Step 6 Pull out the strip light from the fasteners.
Issue 02 (2022-07-30)
Tool: ESD gloves
Material: eLight strip light
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
118