FusionModule2000 Smart Modular Data Center
Maintenance Guide
Figure 5-19 Removing an SD card
Step 3 Remove the monitoring network cable from the camera and remove the camera.
Figure 5-20 Removing the camera
Step 4 Install the new camera and SD card. Then, set parameters and commission the
camera according to the commissioning guide.
Step 5 Check that the camera functions properly.
----End
5.4.3 Parts Replacement for the Access System
5.4.3.1 Replacing an Access Actuator
Impact on the System
The aisle access control system cannot be used.
Issue 02 (2022-07-30)
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
76