Huawei FusionModule2000 Maintenance Manual page 15

FusionModule2000 Smart Modular Data Center
Maintenance Guide
●
●
●
●
●
Moving Heavy Objects
●
●
●
●
●
Issue 02 (2022-07-30)
Only trained and qualified personnel should perform hoisting operations.
Check that hoisting tools are available and in good condition.
Before hoisting objects, ensure that hoisting tools are firmly secured onto a
load-bearing object or wall.
Ensure that the angle formed by two hoisting cables is no more than 90
degrees, as shown in the following figure.
Do not drag steel ropes and hoisting tools or bump hoisted objects against
hard objects during hoisting.
Be cautious to avoid injury when moving heavy objects.
When moving the equipment by hand, wear protective gloves to prevent
injuries.
Move or lift the equipment by holding its handles or lower edges. Do not hold
the handles of modules (such as power supply units, fans, and boards) that
are installed in the equipment because they cannot support the weight of the
equipment.
Avoid scratching the cabinet surface or damaging cabinet components and
cables during equipment transportation.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
8