Huawei FusionModule2000 Maintenance Manual page 68

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Step 5 Log in to the ECC800-Pro WebUI.
1.
2.
----End
Issue 02 (2022-07-30)
NO TE
When switching between different versions of the ECC800-Pro on your PC, you are
advised to clear the historical Internet Explorer cache. Failing to do so may cause some
information missed or exception after login. The following provides the details:
1. Open Internet Explorer and choose Tools > Internet Options > General.
2. Select Delete browsing history on exit and click Delete.
3. In the Delete Browsing History dialog box, select all options except Password,
and click Delete.
Enter https://monitoring IP address (such as monitoring IP address https://
192.168.8.10) in the address box of the browser, and then press Enter to
enter the WebUI login page.
Figure 5-3 WebUI login page
On the login page, enter the preset user name admin and preset password
Changeme, set the language, and click Log In.
NO TE
– After the first login, change the password in time to ensure account security and
prevent unauthorized network attacks, such as data tampering. The Company will
not be liable for any security issues caused by your failure to change the preset
password in time or password loss after changing.
– Change the password of the user account periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event notification is configured and the password retrieval mode is
configured under user management, the password can be retrieved.
– An account is logged out due to timeout if no operation is performed within 10
minutes after system login.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
61