Replacing Cables On The Guide Rail Of An Electric Sliding Door - Huawei FusionModule2000 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
Step 5 Install the new eLight power supply in the original position and connect the
cables.
Step 6 Connect the upstream fuse for the eLight power supply.
----End
5.4.26 Replacing Cables on the Guide Rail of an Electric
Sliding Door
Impact on the System
The electric sliding door cannot work during the replacement.
Preparations
●
●
Procedure
Step 1 Remove the side cover from the post.
Step 2 Remove the door box.
Step 3 Remove the cable and extension cable from the electric guide rail.
Step 4 Remove the old guide rail.
Step 5 Install the new guide rail in the original position and connect the cables.
When replacing the guide rail, you must also replace the extension cable.
Issue 02 (2022-07-30)
Tool: ESD gloves
Materials: electric guide rail, extension cable
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Parts Replacement
123