Install The Air Baffle - Lenovo ThinkSystem SR630 Maintenance Manual

Step 3. Grasp the air baffle and carefully lift it out of the server.
Figure 34. Air baffle removal
Attention: Operating the server with the air baffle removed might damage server components. For
proper cooling and airflow, install the air baffle before you power on the server.
After you finish
If you would like to reuse the RAID super capacitor module installed on the bottom of the air baffle, remove it
from the air baffle. See "Remove the RAID super capacitor module on the air baffle" on page 194.

Install the air baffle

Use this information to install the air baffle.
About this task
Depending on the model, your server might not have an air baffle installed. The air baffle you want to install
might be different from the following illustrations, but the removal method is the same.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
ThinkSystem SR630 V2 Maintenance Manual
92