10 X 2.5-Inch Front Drive Bays - Lenovo ThinkSystem SR630 Maintenance Manual

10 x 2.5-inch front drive bays

Use this section to understand the backplane cable routing for server model with ten 2.5-inch front drives.
To connect cables for a 7mm drive backplane, refer to "7mm drive backplane" on page 64.
To connect power cables for a backplane for standard 2.5-inch or 3.5-inch drives, refer to "2.5-inch/3.5-inch
drive backplane (power)" on page 65.
To connect signal cables for a backplane for standard 10 x 2.5-inch front drives, refer to the following cable
routing scenarios depending on your server configuration:
• "Cable routing for onboard configuration" on page 79
• "Cable routing with an SFF HBA/RAID adapter" on page 80
• "Cable routing with an SFF RAID adapter (tri-mode)" on page 81
• "Cable routing with a CFF HBA/RAID adapter" on page 82
ThinkSystem SR630 V2 Maintenance Manual
78