Lenovo ThinkSystem SR630 Maintenance Manual page 87

Cable routing with a CFF HBA/RAID adapter
The following table shows the mapping relationship between backplane connectors and adapter connectors
when a 16i CFF HBA/RAID adapter is installed.
Table 30. Mapping between backplane connectors and adapter connectors when a 16i CFF HBA/RAID adapter is
installed
Backplanes
Front BP (SAS)
Rear BP (if any)
Note: For power and input cable connection of the CFF HBA/RAID adapter, refer to "CFF HBA/RAID
adapter" on page 57.
The following figure illustrates the cable routing for the configuration of 8 x 2.5-inch front SAS/SATA drive
bays with a 16i CFF RAID adapter and a rear 2 x 2.5-inch SAS/SATA drive cage. Connections between
↔ ↔
connectors: ,
1 1 2
Figure 29. Cable routing for 8 x 2.5-inch front SAS/SATA drive bays with a 16i CFF RAID adapter and a rear 2 x 2.5-inch
SAS/SATA drive cage
From
SAS 0
SAS 1
SAS
↔ ↔
, , ...
2 3 3 n n
To
C0
C1
C3
.
Chapter 3 Internal cable routing
77