Lenovo ThinkSystem SR630 Maintenance Manual page 139
Hide thumbs
Also See for ThinkSystem SR630:
- Maintenance manual (182 pages) ,
- Product manual (75 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
About this task
Attention:
• Read "Installation guidelines" on page 83 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Cmxb8e4L4PvMQ7J5PxvuOK
• Youku:
https://list.youku.com/albumlist/show/id_59643656
Procedure
Step 1.
Touch the static-protective package that contains the drive to any unpainted surface on the outside
of the server. Then, take the drive out of the package and place it on a static-protective surface.
Note: Ensure that drive installation meets "Technical rules for drives" on page 87.
Step 2.
Install the EDSFF drive.
Figure 70. EDSFF drive installation
a.
Ensure that the drive tray handle is in the open position. Slide the drive into the drive bay until it
snaps into position.
b.
Close the drive tray handle to lock the drive in place.
Step 3.
Continue to install additional EDSFF drives if necessary.
.
Chapter 4
Hardware replacement procedures
129
Advertisement
Table of Contents
