Lenovo ThinkSystem SR630 Maintenance Manual page 92

Cable routing with a CFF HBA/RAID adapter
The following table shows the mapping relationship between backplane connectors and system board/
adapter connectors when a 16i CFF HBA/RAID adapter is installed.
Table 34. Mapping between backplane connectors and system board/adapter connectors when a 16i CFF HBA/RAID
adapter is installed
Backplanes
Front BP (NVMe)
Front BP (SAS)
Rear BP (if any)
Note: For power and input cable connection of the CFF HBA/RAID adapter, refer to "CFF HBA/RAID
adapter" on page 57.
The following figure illustrates the cable routing for the configuration of 10 x 2.5-inch front drive bays (6 x
SAS/SATA + 4 x AnyBay) with a 16i CFF RAID adapter and a rear 2 x 2.5-inch SAS/SATA drive cage.
Connections between connectors:
Figure 33. Cable routing for 10 x 2.5-inch front drive bays (6 x SAS/SATA + 4 x AnyBay) with a 16i CFF RAID adapter and
a rear 2 x 2.5-inch SAS/SATA drive cage
ThinkSystem SR630 V2 Maintenance Manual
82
From
NVMe 0-1, 2-3
SAS 0
SAS 1
SAS 2
SAS
NVMe 0, NVMe 1
↔ ↔ ↔
, , , ...
1 1 2 2 3 3
To
PCIe 1, PCIe 2
C0
C1
C2
C3
PCIe 6
↔
n n