Front I/O - Lenovo ThinkSystem SR630 Maintenance Manual

Front I/O

Use the section to understand the cable routing for Front I/O.
Cable routing for Front I/O
Note: The illustration shows the cabling scenario for server models with four 3.5-inch front drive bays.
Location of each connector on the front of the server varies by models. For detailed location of front I/O
components for different models, see "Front view" on page 19.
Figure 14. Cable routing for Front I/O
From
VGA cable
1
LCD external diagnostics handset cable
2
USB cable
3
Front diagnostic panel cable
4
ThinkSystem SR630 V2 Maintenance Manual
58
To
VGA connector on the system board
LCD EXT connector on the system board
Front USB connector on the system board
FIO connector on the system board