Edsff Cage Replacement; Remove An Edsff Cage - Lenovo ThinkSystem SR630 Maintenance Manual

Figure 51. CMOS battery installation
After you finish
1. Complete the parts replacement. See "Complete the parts replacement" on page 224.
2. Use the Setup utility to set the date, time, and any passwords.

EDSFF cage replacement

Use this information to remove and install an EDSFF cage

Remove an EDSFF cage

Use this information to remove an EDSFF cage.
About this task
Attention:
• Read "Installation guidelines" on page 83 to ensure that you work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Cmxb8e4L4PvMQ7J5PxvuOK
• Youku:
https://list.youku.com/albumlist/show/id_59643656
Procedure
Step 1. If the security bezel is installed, remove it first. See "Remove the security bezel" on page 203.
Step 2. Locate the EDSFF cage you need to remove, and then remove all the EDSFF drives installed in it.
See "Remove an EDSFF drive" on page 126.
ThinkSystem SR630 V2 Maintenance Manual
112