Table of Contents
Advertisement
Block interface
5.2 Outputs
Table 5-67
outSendToMaster.Unit1-8
Output
outSendToMaster.Unit1-8
5.2.2
outSendToHMI
This output is a structure of the data type "LTypes_HMI_Send". This structure is grouped into 3
further substructures:
• External
• Internal
• BMS
SIMOCRANE ESSM uses this output structure to send all system information, such as process
values, status information and diagnostic data, to the local operator station. The structure of
the block input "inReceiveFromHMI" is identical to that of the input "inReceiveFromMaster".
No BMS or watchdog information is transferred from the HMI however. For more details, see
inReceiveFromMaster (Page 40).
Table 5-68
outSendToHMI
Output
outSendToHMI
5.2.2.1
External
Table 5-69
outSendToHMI.External
Output
outSendToHMI.External
62
Name
Data
type
Unit1 – Unit8
Struct
Name
Data type
outSendToHMI
LTypes_HMI_Send
Name
Data
type
External
Struct
Higher-level data
Comment
type
outSendToMaster
Structure, see section SINAMICS
DCP receive (16 word)
(Page 88)
Comment
-
Higher-level data
Comment
type
outSendToHMI
The constituent elements of the
structure are identical to those of
the structure "LTypes_Master_Re‐
ceive". All information from the
higher-level control is transferred
to the HMI. For information
about the constituent elements,
see chapter inReceiveFromMas‐
ter (Page 40).
SIMOCRANE Energy Storage System Management V01.01
Operating Instructions, 04/2023, A5E51573536B AE
Advertisement
Table of Contents
