Fujitsu AJ 126LELDH Series Design & Technical Manual page 754

• Floor installation
Use 4 screws (accessory) to fasten the unit to the floor.
• Wall installation
Remove the 2 screws and replace them with the hanger.
Use 4 screws (accessory) to fasten the unit to the wall.
¢ Connect the pipes
Connect EV kit to liquid pipe of EEV external models indoor unit.
Pipe size
Use a torque wrench to tighten the flare nut.
Pipe size
Tightening torque
3-2. EV kit
Screw (Accessory)
Screw
Indoor unit side
mm (in)
Outdoor unit side
Body side
- (06-40) -
Screw (Accessory)
Screw
Ø6.35 (1/4)
Holding spanner
90°
Torque wrench
mm (in)
N•m
Wall
Flare connection
Ø6.35 (1/4)
16.0 to 18.0
3. Piping connection