Address Setting - Fujitsu AJ 126LELDH Series Design & Technical Manual

1-2. Address setting

Address for each unit should be preset before starting system operation. Refer to
Chapter 6. SYSTEM DESIGN on page 06-1 to confirm the details of each unit, and perform the set-
ting.
¢ Outdoor unit addresses and setting ranges
Setting
Refrigerant circuit
A
address
Terminal resistor
1-2. Address setting
Setting
Type of switch
range
Setting example
00—99
01
ON/OFF
- (07-4) -
Arbitrary numbers can be set in
range of 00—99.
REF AD REF AD
x10 x1
DIP switch SET5-4
Refer to
setting"
SET5
"System design" in
Remarks
"Terminal resistor
on page 07-63.
1. System settings