Fujitsu AJ 126LELDH Series Design & Technical Manual page 902

2. By pressing the + or - button, select the function number. Then press the ENTER button.
3. By pressing the + or - button, select the setting number.
• When the address data is properly set up on the indoor unit, the set number will be dis-
played. (GOOD)
• When the address data is not set up correctly, "- -" is displayed. (ERROR) Back to the previ-
ous step and perform the setting again.
4. To return to the address selection screen, press the ENTER button. If setting has been com-
pleted, press MENU button to return to the Menu 2 item selection screen.
RELATED LINKS
"Completion of setting mode"
"Function details" on page 07-108
¢ Setting up each indoor unit
Setting must be performed on each indoor unit by repeating following procedures.
• "Preparation" on page 07-105
• "Indoor unit function setting"
Indoor unit
01
2-9. Indoor unit (setting by UTY-RLR)
ERROR
on page 07-53
on page 07-105
Indoor unit Indoor unit
00 0 01 01 0 01 02 0
Wired remote
controller
Example) Function number: 30; Setting number: 01
Indoor unit Indoor unit
01 13 0 01
Wired remote Wired remote
controller controller
- (07-106) -
Function number
Setting number
GOOD
Indoor unit
14 0 01 15 0
2. Function settings