Fujitsu AJ 126LELDH Series Design & Technical Manual page 755

¢ Attach the insulation material
Insulation by the coupler heat insulation around the pipe.
¢ Wiring procedure
1. Connect the EV kit wire to the indoor unit.
2. Wrap the tube around the connection, and fasten both ends binders.
3. Connect the ground to the indoor unit.
CAUTION
Never bundle the wire with power supply.
¢ Specifications
Model name
Dimensions (H × W × D)
Weight
Connection wire length method
3-2. EV kit
Coupler heat insulation
No gap
mm
g
m
- (06-41) -
Coupler heat insulation
No gap
Wire (indoor unit)
EV kit wire
Connect
Tube (short)
Ground
UTR-EV09XB
121 × 416 × 65
Indoor unit
Binder (small)
UTR-EV14XB
1,500
5
3. Piping connection