Fujitsu AJ 126LELDH Series Design & Technical Manual page 821

 Reconfirmation of address setting
Press and hold the FAN and the SET TEMP.▲ buttons. Whilst holding these 2 buttons, press the
RESET button.
• Indoor unit address setting
1. Make sure that the function number is set to "01" with referring the step 2. in
dress setting"
2. Press the TIMER set (-) button. Associating indication will be shown on the indoor unit LED
lamps.
TIMER set (-)
• Refrigerant circuit address setting
1. Make sure that the function number is set to "01" with referring the step 2. in
circuit address setting"
2. Press the TIMER set (-) button. Associating indication will be shown on the indoor unit LED
lamps.
TIMER set (-)
1-4. Address setting by remote controller
FAN
SET TEMP. ( )
RESET
on page 07-20.
on page 07-22.
- (07-25) -
Function setting
mode display
Example) ADDRESS: 34
OPERATION lamp
(Green)
0.5 sec ON / 0.5 sec OFF
TIMER lamp
(Orange)
3 times
0.5 sec ON / 0.5 sec OFF
FILTER lamp
(Red)
4 times
Example) ADDRESS: 25
OPERATION lamp
(Green)
0.5 sec ON / 0.5 sec OFF
TIMER lamp
(Orange)
2 times
0.5 sec ON / 0.5 sec OFF
FILTER lamp
(Red)
5 times
"Indoor unit ad-
1 to 10 sec
1 to 10 sec
"Refrigerant
1 sec ON / 1 sec OFF
1 to 10 sec
1 to 10 sec
1. System settings