Group Remote Controller - Fujitsu AJ 126LELDH Series Design & Technical Manual

2-13. Group remote controller

DIP switch
¢ Switch location
¢ DIP switch 1 setting
• SW1: Memory backup setting
If there is a power failure when this setting is enabled, all the settings stored in the memory
will be saved.
• SW2: Setting prohibited
2-13. Group remote controller
SW1 Memory backup setting
SW2 Prohibited
Front case (back side)
DIP switch
SW1
OFF
ON
SW2
OFF
ON
ON
OFF ON
1
2
Memory backup
Disable
Enable
Fixed at OFF
Setting prohibited
- (07-116) -
Factory setting
♦
Factory setting
♦
2. Function settings