Fujitsu AJ 126LELDH Series Design & Technical Manual page 913

¢ Group remote controller address setting
1. To start the setting, hold down the set time buttons
or more.
2. Press the set time buttons to set the group remote controller address.
3. Press the ENTER button. Check the
4. To complete the setting, hold down the set time buttons
seconds or more again.
2-13. Group remote controller
Reverse Advance
- (07-117) -
and simultaneously for 2 seconds
Check that it is .
Group remote controller address
and flash for 2 seconds.
and simultaneously for 2
2. Function settings