Figure 48. Installing the front adapter assembly
a.
Insert the front adapter assembly into the front chassis.
b.
Install the screws to secure the front adapter assembly in place.
Step 8.
Connect the cables to the system board assembly and the rear OCP interposer card. See
6 "Internal cable routing" on page
Step 9.
Install the system fan cage. See
Step 10. Install system fans. See
Step 11. Install the riser 1 assembly if you have removed it. See
After you finish
Complete the parts replacement. See
Front OCP module and OCP interposer card replacement
Some server models support the front OCP module. The front OCP module and the front and rear OCP
interposer cards are codependent. Follow instructions in this section to remove and install the front OCP
module and the front and rear OCP interposer cards.
•
"Front OCP module replacement" on page 91
•
"OCP interposer card replacement" on page 94
Front OCP module replacement
Follow instructions in this section to remove and install the front OCP module.
•
"Remove the front OCP module" on page 92
281.
"Install the system fan cage" on page
"Install a system fan" on page
"Complete the parts replacement" on page
270.
266.
"Install a rear riser assembly" on page
279.
.
Chapter 5
Hardware replacement procedures
Chapter
242.
91