Figure 146. Installing the cable retainer
Step 5.
Connect the cables to the system board assembly. See
281.
After you finish
1. Install the air baffle. See
2. Install the security bezel if you have removed it. See
3. Complete the parts replacement. See
RAID flash power module replacement
The RAID flash power module protects the cache memory on the installed RAID adapter. Follow instructions
in this section to remove and install a RAID flash power module (also called supercap).
The location of RAID flash power modules varies by the server hardware configurations.
"Install the air baffle" on page
"Complete the parts replacement" on page
Chapter 6 "Internal cable routing" on page
72.
"Install the security bezel" on page
.
Chapter 5
Hardware replacement procedures
246.
279.
189