Lenovo ThinkSystem SR665 V3 User Manual page 118
Hide thumbs
Also See for ThinkSystem SR665 V3:
- System configuration manual (80 pages) ,
- User manual (256 pages)
Table of Contents
Advertisement
Step 2.
Install the riser card and connect the cables to the riser card. See
on page
281.
Figure 65. Installing the riser card
a.
Insert the riser card into the slots in the riser cage.
b.
Push the top of the riser card towards the riser cage so that the holes in the riser card
engage with the holes on the riser cage.
c.
Install the screws to secure the riser card into place.
Step 3.
Install the PCIe adapter to the riser 5 cage.
Figure 66. Installing the PCIe adapter to the riser 5 cage
a.
Press the retainer clip downward.
b.
Rotate the PCIe adapter retention latch to the open position.
c.
Align the PCIe adapter with the PCIe slot on the riser card. Carefully press the PCIe adapter
straight into the slot until it is securely seated and its bracket also is secured.
d.
Close the retention latch.
Step 4.
Install the riser 5 assembly on the front OCP assembly.
ThinkSystem SR665 V3 User Guide
108
Chapter 6 "Internal cable routing"
Advertisement
Table of Contents
