Lenovo ThinkSystem SR665 V3 User Manual page 32

Front I/O module (on rack latch)
Table 12. Components on the front I/O module
Callout
USB 3 (5 Gbps) connector
1
Power button with power status LED
3
System ID button with system ID LED
5
Front operator panel or integrated diagnostics panel
7
1 USB 3 (5 Gbps) connector
The USB 3.2 Gen 1 (5 Gbps) connector can be used to attach a USB-compatible device, such as a USB
keyboard, USB mouse, or USB storage device.
2 USB 2.0 connector with XClarity Controller management
Depending on the setting, this connector supports USB 2.0 function, XClarity Controller management
function, or both. It is the only USB port that supports USB automation update of the firmware and RoT
security module.
• If the connector is set for USB 2.0 function, it can be used to attach a USB-compatible device, such as a
USB keyboard, USB mouse, or USB storage device.
• If the connector is set for XClarity Controller management function, it can be used to connect the server to
an android or iOS device, where you can then install and launch the Lenovo XClarity Mobile app to
manage the system using XClarity Controller.
For details about using the Lenovo XClarity Mobile app, refer to
com.lenovo.lxca.doc/lxca_usemobileapp.html
• If the connector is set to have both functions, you can press the system ID button for three seconds to
switch between the two functions.
3 Power button with power status LED
ThinkSystem SR665 V3 User Guide
22
Front I/O module (on media bay)
Callout
USB 2.0 connector with XClarity Controller
2
management
Network activity LED (for OCP module)
4
System error LED
6
http://sysmgt.lenovofiles.com/help/topic/
.