Lenovo ThinkSystem SR665 V3 User Manual page 102
Hide thumbs
Also See for ThinkSystem SR665 V3:
- System configuration manual (80 pages) ,
- User manual (256 pages)
Table of Contents
Advertisement
•
"Install the front OCP module" on page 93
Remove the front OCP module
Follow instructions in this section to remove the front OCP module.
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
Figure 49. Removing the front OCP module
Step 1.
Loosen the thumbscrew that secures the OCP module. Use a screwdriver if needed.
Step 2.
Pull out the OCP module.
After you finish
1. Install a new front OCP module or an OCP module filler. See
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
ThinkSystem SR665 V3 User Guide
92
and
"Safety inspection checklist" on page 48
62.
"Install the front OCP module" on page
to ensure that you
93.
Advertisement
Table of Contents
