Lenovo ThinkSystem SR665 V3 User Manual page 247

Figure 206. Removing the PCIe adapter from riser 3 assembly
a. Press the retainer clip downward.
b. Rotate the PCIe adapter retention latch to the open position.
c. Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe slot.
• 4LP riser 3/4 assembly
Figure 207. Removing a PCIe adapter from the 4LP riser 3/4 assembly
a. Remove the screw that secures the PCIe adapter.
b. Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe slot.
Step 3. (Optional) If you are replacing the riser card, disconnect cables from the riser card if needed and
remove the riser card from the riser cage.
.
Chapter 5 Hardware replacement procedures
237