Intrusion Switch Replacement; Remove The Intrusion Switch - Lenovo ThinkSystem SR665 V3 User Manual

Figure 96. Installing the internal CFF adapter
Step 3. Connect cables to the adapter. See
After you finish
1. Install the system fan cage. See
2. Complete the parts replacement. See
Demo video
Watch the procedure on YouTube

Intrusion switch replacement

Follow instructions in this section to remove and install the intrusion switch. The intrusion switch informs you
that the server cover is not properly installed or closed by creating an event in the system event log (SEL).
• "Remove the intrusion switch" on page 139
• "Install the intrusion switch" on page 141

Remove the intrusion switch

Follow instructions in this section to remove the intrusion switch.
About this task
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Chapter 6 "Internal cable routing" on page
"Install the system fan cage" on page
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 48
62.
281.
270.
279.
.
Chapter 5 Hardware replacement procedures
to ensure that you
139