Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 112

Chapter 5 Setup
5.1 Basic Setup
■ For FCoE ports
Set the connection information for the FCoE ports on the ETERNUS DX Disk storage system and the server.
Procedure
1
Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen. On the
[Connectivity] screen, click "FCoE" under "Port Group" in [Category].
The [FCoE Port Group] screen appears.
2
Select the checkbox for the FCoE port to set the port parameters for in the [FCoE Port Group]
screen and then click "Modify FCoE Port Parameters" in [Action].
The [Modify FCoE Port Parameters] screen appears.
3
Set the required items and click the [Set] button.
A confirmation screen appears.
4
Click the [OK] button.
The port parameter is set and the setting completion screen appears.
5
Click the [Done] button.
The screen display returns to the [FCoE Port Group] screen.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
112
Copyright 2013 FUJITSU LIMITED
End of procedure
P3AM-4832-07ENZ0