Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 128

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
■ User setup
(1)
In [Action], click [Setup SNMP Agent User].
The [Setup SNMP Agent User] screen appears.
(2)
In the user list of the [Setup SNMP Agent User] screen, click the [Add] button.
(3)
Enter the user name, set the required items, and click the [OK] button.
The screen display returns to the user list of the [Setup SNMP Agent User] screen.
(4)
Check the SNMP Agent user name that was set in
button.
A confirmation screen appears.
(5)
Click the [OK] button.
The SNMP Agent user settings are applied.
(6)
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
Step (3)
128
Copyright 2013 FUJITSU LIMITED
is added in the user list and click the [Set]
P3AM-4832-07ENZ0