Fujitsu ETERNUS DX80 S2 User's Manual & Installation Instructions page 129

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
5
Set up the SNMP Trap.
Set up the destination for sending the SNMP Trap.
This step is not required when ETERNUS SF Storage Cruiser is used to monitor the ETERNUS DX Disk
storage system.
5-1
In [Action], click [Setup SNMP Agent Trap].
The [Setup SNMP Agent Trap] screen appears.
5-2
In the trap list of the [Setup SNMP Agent Trap] screen, click the [Add] button.
5-3
Select the Manager No. that was set in
the [OK] button.
The screen display returns to the trap list of the [Setup SNMP Agent Trap] screen.
5-4
Check the SNMP Trap that was set in
A confirmation screen appears.
5-5
Click the [OK] button.
The SNMP Agent Trap settings are applied.
5-6
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
Step 3 for "Manager No.", set the required items, and click
Step 5-3 is added in the trap list and click the [Set] button.
129
Copyright 2013 FUJITSU LIMITED P3AM-4832-07ENZ0