Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
3-3
Enter the IP address of SNMP Manager (monitoring server) and click the [OK] button.
The screen display returns to the manager list of the [Setup SNMP Agent Manager] screen.
3-4
Check the SNMP Manager that was added in
[Set] button.
A confirmation screen appears.
3-5
Click the [OK] button.
The SNMP Manager settings are applied.
3-6
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
4
Set up a community or a user.
Set up the community or the user that is used for SNMP Trap.
To use SNMPv1 or SNMPv2c, perform the "Setup SNMP Agent Community" settings.
To use SNMPv3, perform the "Setup SNMP Agent User" settings.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Installation-
Step 3-3
is displayed in the manager list and click the
126
Copyright 2013 FUJITSU LIMITED
P3AM-4832-07ENZ0